You are buying one Premium Brightlink 150 FT (approx 46 meter) c/w ONE amplifier mid-span and USB power boosters on each end. ***NOTE, pictures shows more than one amplifer but these are only for cables 200FT and longer. High Speed HDMI 2.0 cable with 3D, Ethernet channel, ARC, 1440p, 1080p & 4K@30fps (2160p) Ultra HD resolution, 2 video streams (Dual View), 21:9 aspect ratio.
This longer length cable comes with one amplifier mid-span and USB boosters on each end. The USB boosters are meant to be plugged into your source and to you display to add additional power. These boosters are necessary to ensure 100% signal with no attenuation. Most sources and displays have USB ports right beside your HDMI ports.***NOTE, these cables are ONE DIRECTIONAL, meaning they only run one way or you will not get any signal. INPUT goes into sources and OUTPUT goes to your display.
HDMI 2.0, which is backwards compatible with earlier versions of the HDMI specifications, significantly increases bandwidth up to 18Gbps and adds key enhancements to support continuing market requirements for enhancing the consumer video and audio experience.
This is the latest version and is currently compatible with any HDMI devices out there that have TYPE A connectors. These cables are made from high quality materials and are CL3 rated for in-wall installation, ideal for professional installers as well as people installing home theaters systems who want to ensure flawless crisp signals and guaranteed durability. The thick 24AWG shaft provides extra insulation and ruggedness for the longer length cables.
Shipping is US $35.00 anywhere in the USA and take approx 4-7 business days to arrive VIA DHL Express with tracking number. ****Note we will combined ship to reduce shipping cost. These itmes are located at our Bloomington, California warehouse or Shenzhen warehouse depending on availability stock. Transit times are the same from either warehouse.
This product is protected by a 90 Day Satisfaction Guarantee
Is HDMI 2.0 backwards compatible with HDMI 1.x?
Yes, all HDMI versions are fully backward compatible with all previous versions.
Does HDMI 2.0 replace HDMI 1.x?
No, HDMI 2.0 is built on top of HDMI 1.x and any device that wants to implement HDMI 2.0 must first implement HDMI 1.x as a baseline requirement.
Does HDMI 2.0 require new connectors?
No, HDMI 2.0 uses the existing connectors.
Does HDMI 2.0 require new cables?
No, HDMI 2.0 features will work with existing HDMI cables. Higher bandwidth features, such as 4K@50/60 (2160p) video formats, will require existing High Speed HDMI cables (Category 2 cables).
Can my existing HDMI 1.x devices be upgraded with HDMI 2.0 features?
Currently, there are no provisions for doing such an upgrade. Because of the new enhanced feature set, any such conversion would require hardware and/or firmware upgrades. If there are such conversions, it would come from the manufacturer. Please check with them directly.
Can existing HDMI cables support the higher bandwidths of HDMI 2.0 Specification?
Yes, existing High Speed HDMI Cables (wire only) will support the new higher bandwidths (up to 18Gbps).
HDMI 2.0 specification defined a new, more efficient signaling method, for speeds above 1.4b limits (10.2Gbps), to allow higher bandwidths (up to 18Gbps) over existing High Speed HDMI Wire Cables.